Tags

Tags give the ability to mark specific points in history as being important

  • v0.1.2

    protected
    92fefca4 · the schema pin names a commit the remote has · 
    v0.1.2: the stable pins move to client v0.3.0

CLIENT_REF_STABLE b7087de (2026-08-19, reports 0.1.0) -> 888e67c (client
v0.3.0: ADR 0021, stvid's rule as the station default, __version__ 0.3.0).
SCHEMA_REF 4aa7ca1 -> 93376c8, so aligned-strip crops can be published.

  • v0.1.1

    protected
    2418da1b · Write the real PTUUID into cmdline.txt and fstab at assemble time · 
    SatNOGS Optical SD-card image v0.1.1

The first FLASHABLE release. v0.1.1 exists because v0.1.0 was booted -- under
QEMU and systemd-nspawn, the first time any built image ran -- and that boot
found what no green pipeline could: cmdline.txt and /etc/fstab shipped with
placeholder PARTUUIDs (deadbeef-02, 00000000), so the card never found its
root filesystem on real hardware. The assemble stage now reads the disk's
PTUUID with blkid, rewrites both files, and refuses to finish if a
placeholder survives.

Everything v0.1.0 verified still holds: first-boot provisioning writes the
identity and station.toml, the setup page serves, the claim keypair and code
generate, and the station announces itself to optical.satnogs.org. The
announce currently receives HTTP 404 -- the server half of the claim
protocol is the known remaining gap, tracked in the planning repo's HANDOFF.

Do not flash or submit v0.1.0. First boot on real hardware still owes the
hardware-matrix its "tested" cell and the cloudinit-rpi verification before
the Raspberry Pi Imager submission is filed.

Signed-off-by: Pierros Papadeas <pierros@papadeas.gr>

  • v0.1.0

    protected
    557c6528 · Prepare the official Raspberry Pi Imager submission package · 
    SatNOGS Optical SD-card image v0.1.0

The first tagged release: Raspberry Pi OS Lite arm64 Trixie (2026-06-18) base;
chrony/gpsd/pps-tools installed at assemble time (ADR 0009/0011 -- the clock
gate must be satisfiable offline); the satnogs-optical-client payload and its
locked wheelhouse (fastapi 0.115.6 / uvicorn 0.34.0 / scipy included);
optical-setup.service on port 80 for the claim flow; provisioning.verify
--unclaimed as the release gate.

Built and published by CI: .img.xz + os_list.json + os-packages.txt to the
generic package registry under this tag, rpi-imager.json + icon to Pages.

NOT yet booted on hardware. The first flashed card owes the hardware-matrix
a "tested" cell and the cloudinit vs cloudinit-rpi verification before the
Raspberry Pi Imager submission (docs/imager-submission.md) is filed.

Signed-off-by: Pierros Papadeas <pierros@papadeas.gr>