### Name of device: Razer Laptop Stand Chroma ### Link to manufacturer's product page: https://www.razer.com/gaming-pc-accessories/Razer-Laptop-Stand-Chroma/RC21-01110200-R3M1 ### Please select what type of device/interface the device uses: ~"DeviceType::USB" <!-- The device connects to an internal header or external usb port --> ### ID information: | Description | Service | DeviceID | | ------ | ------ | ------ | | Razer Laptop Stand Chroma | mouhid | HID\VID_1532&PID_0F0D&MI_00\8&3552817B&0&0000 | | Razer Laptop Stand Chroma | HidUsb | USB\VID_1532&PID_0F0D&MI_02\7&221BE1B7&0&0002 | ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. -->  ### Please attach device captures here: <!-- If you have code examples from other projects please link them here or alternatively for information on how to capture device packets please refer to the wiki article https://gitlab.com/Dr_No/OpenRGB/-/wikis/OpenRGB-doesn%27t-have-my-device --> <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [x] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->