<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line --> ASUS ROG STRIX RTX 2080 8G Gaming ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line --> https://rog.asus.com/de/graphics-cards/graphics-cards/rog-strix/rog-strix-rtx2080-8g-gaming-model/ ### Please select what type of device/interface the device uses: <!-- Please select from one of the following This determines how the device connects to the PC --> ~"DeviceType::GPU::NVidia" <!-- The device is a NVidia GPU --> <!-- Please delete any lines that are not relevant --> ### ID information: <!-- For PCI (GPU) devices we will need the Vendor ID, Device ID, Sub-Vendor ID and Sub-Device IDs To get the Device ID formation for a GPU on Windows run the following command in Powershell: wmic path Win32_VideoController get name,PNPDeviceID Linux this can be found using the terminal: lspci -d 1002: -nnvm | head -6 | tail -n 4 && lspci -d 10DE: -nnvm | head -6 | tail -n 4 --> <!-- For USB devices we will need the USB VID and PID Windows Powershell: gwmi Win32_USBControllerDevice |%{[wmi]($_.Dependent)} | Sort Manufacturer,Description,DeviceID | Ft -GroupBy Manufacturer Description,Service,DeviceID Linux Terminal: lsusb --> NVIDIA GeForce RTX 2080 PCI\VEN_10DE&DEV_1E82&SUBSYS_867F1043&REV_A1\4&20DB0AC4&0&0008 ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. --> ### Please attach device captures here: <!-- If you have code examples from other projects please link them here or alternatively for information on how to capture device packets please refer to the wiki article https://gitlab.com/Dr_No/OpenRGB/-/wikis/OpenRGB-doesn%27t-have-my-device --> it works after adding these two lines: REGISTER_I2C_PCI_DETECTOR("ASUS ROG STRIX RTX 2080 8G Gaming" , DetectAsusAuraGPUControllers, NVIDIA_VEN, NVIDIA_RTX2080_DEV, ASUS_SUB_VEN, ASUS_ROG_STRIX_RTX2080_8G_GAMING, 0x2A); #define ASUS_ROG_STRIX_RTX2080_8G_GAMING 0x867F <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [ ] Screenshots of the OEM Application are included - [x] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->