I would be happy if the ASUS Gladius 3 Wireless Mouse could be supported. [ASUS-Homepage](https://rog.asus.com/mice-mouse-pads/mice/wireless/rog-gladius-iii-wireless-model/) The Gladius 2 is apparently already supported. <!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: ASUS Gladius 3 (Wireless) ### Link to manufacturer's product page: https://rog.asus.com/mice-mouse-pads/mice/wireless/rog-gladius-iii-wireless-model/ ### Please select what type of device/interface the device uses: ~"DeviceType::USB" USB with cable, USB with Dongel and Bluetooth is possible. ### ID information: ``` ROG GLADIUS III WIRELESS mouhid HID\VID_0B05&PID_197F&MI_01\B&102F797A&0&0000 ROG GLADIUS III WIRELESS kbdhid HID\VID_0B05&PID_197F&MI_02&COL04\B&3406B73C&0&0003 ``` ### Please attach screenshots of the device's official control application here: All LEDs are one input.  ### Please attach device captures here: Maybe it can be controlled similarly to the ROG Gladius II, which is already supported. <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [x] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->