<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line --> CoolerMaster MM720 ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line --> https://www.coolermaster.com/catalog/peripheral/mice/mm720/ ### Please select what type of device/interface the device uses: <!-- Please select from one of the following This determines how the device connects to the PC --> ~"DeviceType::USB" <!-- The device connects to an internal header or external usb port --> <!-- Please delete any lines that are not relevant --> ### ID information: <!-- For PCI (GPU) devices we will need the Vendor ID, Device ID, Sub-Vendor ID and Sub-Device IDs To get the Device ID formation for a GPU on Windows run the following command in Powershell: wmic path Win32_VideoController get name,PNPDeviceID Linux this can be found using the terminal: lspci -d 1002: -nnvm | head -6 | tail -n 4 && lspci -d 10DE: -nnvm | head -6 | tail -n 4 --> <!-- For USB devices we will need the USB VID and PID Windows Powershell: gwmi Win32_USBControllerDevice |%{[wmi]($_.Dependent)} | Sort Manufacturer,Description,DeviceID | Ft -GroupBy Manufacturer Description,Service,DeviceID Linux Terminal: lsusb --> HID\VID_2516&PID_0141&MI_00\8&E2472D0&0&0000 ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. -->  ### Please attach device captures here: <!-- If you have code examples from other projects please link them here or alternatively for information on how to capture device packets please refer to the wiki article https://gitlab.com/Dr_No/OpenRGB/-/wikis/OpenRGB-doesn%27t-have-my-device --> [mm_720_ReportDescriptor.pcapng](/uploads/f9af6ed4a0d7e532a1de3c5f3ed4ace7/mm_720_ReportDescriptor.pcapng) [mm_720_StaticBlue.pcapng](/uploads/a5a962d641cbe4d689381e68c002414c/mm_720_StaticBlue.pcapng) [mm_720_StaticGreen.pcapng](/uploads/0bf345dceb6e20ef6afa8d36a26afb5d/mm_720_StaticGreen.pcapng) [mm_720_StaticRed.pcapng](/uploads/26ecb5768322a723a079b4e6235c7397/mm_720_StaticRed.pcapng) [mm_720_Off.pcapng](/uploads/70614c89081de9a98f375ff6420488b0/mm_720_Off.pcapng) [mm_720_Static_and_Breathing_Modes_White.pcapng](/uploads/482704a4a0aa86f11bf553c520c37d67/mm_720_Static_and_Breathing_Modes_White.pcapng) [mm_720_Breathing_Speed.pcapng](/uploads/3315847e4f5aa68dc0d4b29e8c7c7dc1/mm_720_Breathing_Speed.pcapng) [mm_720_Brightness.pcapng](/uploads/fed0e21bd4df8d855a2e5ebfbf9c9d07/mm_720_Brightness.pcapng) <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [x] Screenshots of the OEM Application are included - [x] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->