<!-- When naming the support request please title the request as `[New Device] <Name of new device>` Please open one issue per device you would like to add --> ### Name of device: <!-- Please put the name of the product, including manufacturer, beneath this line Roccat Burst Pro ### Link to manufacturer's product page: <!-- Please add a link to the manufacturer's product page beneath this line https://www.roccat.com/products/burst-pro ### Please select what type of device/interface the device uses: <!-- Please select from one of the following This determines how the device connects to the PC --> ~"DeviceType::USB" <!-- The device connects to an internal header or external usb port --> ### ID information: For USB devices we will need the USB VID and PID HID\VID_1E7D&PID_2DE1&REV_0101&MI_02&Col04 ### Please attach device captures here: [Wireshark_Capture_Roccat_Burst_Pro.zip](/uploads/8d3c7063353c55a74b6301818d34b07d/Wireshark_Capture_Roccat_Burst_Pro.zip) project supporting this device written in rust https://github.com/X3n0m0rph59/eruption/blob/master/eruption/src/hwdevices/roccat_burst_pro.rs ### Please attach screenshots of the device's official control application here: <!-- Screenshots of the official control software should show lists of supported modes, color selection, and zone/LED selection capabilities of the device's official software. -->    (/uploads/94908fd9d7590cca95a67f975f04f787/usb_descriptor_rocat_burst.pro.pcapng)  <!-- For admin purposes: Please leave this section as is --> # Checklist for Step2 - [x] Name of device - [x] A link to the vendors product page has been included - [x] The transport bus has been identified and the appropriate label added to the issue. - [x] The device ID's have been included for [USB](https://gitlab.com/Dr_No/OpenRGB/-/wikis/USB-Vendor-Identification-and-Product-Identification) or PCI - [x] Screenshots of the OEM Application are included - [ ] There is either, appropriate code examples linked or suitable device captures attached <!-- For admin purposes: Please leave this section as is -->